Umbala wendalo we-NEMA G5 Ilaphu leglasi ye-Melamine elaminate ifanelekile kwi-arc resistant material ekutshintsheni
Ingcaciso yeMveliso
Le mveliso ishidi elaminethiweyo elenziwe ngelaphu leglasi yealkali ye-eletrical efakwe kwi-melamine resin ngokucinezela okutshisayo.Inokumelana ne-arc elungileyo kunye neempawu ezithile ze-dielectric kunye neempawu ze-flame retardant.Ingasetyenziswa njengezinto zokumelana ne-arc ekutshintsheni, iinxalenye zesakhiwo sezixhobo zombane kunye nezixhobo zokwahlula izixhobo zombane.
Iimbonakalo
1.Uzinzo oluhle lombane phantsi komswakama ophezulu;
2.Amandla aphezulu omatshini phantsi kobushushu obuphezulu;
3.Ukumelana nokufuma;
4.Ukumelana nobushushu;
5.Ukumelana nobushushu:IBanga F
Ukuthotyelwa kwemigangatho:
Ngokuhambelana ne-GB / T 1303.4-2009 yombane we-thermosetting resin industrial hard laminates - Icandelo 4: i-epoxy resin hard laminates.
Imbonakalo: umphezulu kufuneka ube mcaba, ungabi namaqamza, imingxuma kunye nemibimbi, kodwa ezinye iziphene ezingachaphazeli ukusetyenziswa zivumelekile, ezinje: imikrwelo, ukufakwa, amabala kunye namabala ambalwa. ubuso besiphelo abuyi kunqanyulwa kwaye buqhekeke.
Isicelo:
Ilungele zonke iintlobo zeemoto, izixhobo zombane, i-elektroniki kunye namanye amacandelo.
Isalathiso sokuSebenza esiPhambili
HAYI. | INTO | IYUNITHI | ISALATHISI IXABISO | ||
1 | Ukuxinana | g/cm³ | 1.8-2.0 | ||
2 | Ireyithi yokufunxa amanzi | % | ≤3.0 | ||
3 | Amandla okugoba ngokuthe nkqo | MPa | ≥200 | ||
4 | Amandla empembelelo enxuseneyo (i-charpy type-gap) | KJ/m² | ≥25 | ||
5 | Amandla ombane amileyo (kwioyile ye90℃±2℃) | 1mm | KV/mm | ≥7.0 | |
2mm | ≥5.4 | ||||
3mm | ≥5.0 | ||||
6 | Umbane wokuqhekeka onxuseneyo (kwi-oyile ye-90 ℃ ± 2 ℃) | KV | ≥15 | ||
7 | I-Insulation Resistance | Okuqhelekileyo | Ω | ≥1.0×1010 | |
Emva kokucwina iiyure ezingama-24 | ≥1.0×108 | ||||
8 | Ukutsha | Inqanaba | V-0 |