347/347F Amandla aphezulu Epoxy Glassfiber elaminethiweyo sheet (Thermostability yibakala F)
Ingcaciso yeMveliso
Le mveliso ishiti elaminethiweyo elenziwe ngelaphu lefayibha yeglasi engeyiyo-alkali njengesixhobo sokuxhasa, ngokucinezela shushu ngebakala F benzo oxazine resin.Ineempawu ezilungileyo zoomatshini kunye nombane, kunye nedangatye elibuyiswayo, ngakumbi linokugcina amandla omatshini aphezulu kunye nezixhobo zombane ezigqwesileyo phantsi kobushushu obuphezulu. Ifanelekile kwibakala F kunye nezixhobo zombane njengomgangatho ophezulu wokugquma, unenzuzo yokusebenza kakuhle kunye nokusebenza okubanzi iimveliso ezifanayo.
Iimbonakalo
1.Iipropati ezilungileyo zoomatshini kunye nombane;
2.High ukugcinwa kwamandla oomatshini kunye
iimpawu zombane ezigqwesileyo phantsi kobushushu obuphezulu;
3.Ukumelana nokufuma;
4.Ukumelana nobushushu;
5.Ukumelana nobushushu: iBanga F;
6.Good Machinability kunye nokusebenza ngokubanzi
7.Ipropathi ye-Flame retardant: UL94 V-0
Ukuthotyelwa kweMigangatho
Ngokuhambelana ne-GB / T 1303.4-2009 yombane we-thermosetting resin industrial hard laminates - Icandelo 4: i-epoxy resin hard laminates.
Imbonakalo: umphezulu kufuneka ube mcaba, ungabi namaqamza, imingxuma kunye nemibimbi, kodwa ezinye iziphene ezingachaphazeli ukusetyenziswa zivumelekile, ezinje: imikrwelo, ukujikela, amabala kunye namabala ambalwa. ubuso besiphelo abuyi kunqanyulwa kwaye buqhekeke.
Isicelo
Idatha yobuchwephesha ye-347F iyafana ne-FR5, Ifanelekile kwibakala F lemoto kunye nezixhobo zombane njengomgangatho ophezulu wokugquma.
Isalathiso sokuSebenza esiPhambili
| HAYI. | INTO | IYUNITHI | ISALATHISI IXABISO | |||
| 347 | 347F | |||||
| 1 | Ukuxinana | g/cm³ | 1.8-2.0 | 1.8-2.0 | ||
| 2 | Ireyithi yokufunxa amanzi | % | ≤0.5 | ≤0.5 | ||
| 3 | Amandla okugoba ngokuthe nkqo | Okuqhelekileyo | MPa | ≥440 | ≥400 | |
| 155±2℃ | ≥280 | ≥250 | ||||
| 4 | Amandla oxinzelelo | Ngokuthe nkqo | MPa | ≥350 | ≥300 | |
| Ngokunxuseneyo | ≥260 | ≥200 | ||||
| 5 | Amandla empembelelo (uhlobo lwe-charpy) | Ubude akukho msantsa | KJ/m² | ≥147 | ≥129 | |
| Ukuthe tye akukho msantsa | ≥98 | ≥77 | ||||
| 6 | Amandla okudibanisa | N | ≥7200 | ≥6800 | ||
| 7 | Tensile strength | Ubude | MPa | ≥280 | ≥240 | |
| Ukuthe tye | ≥200 | ≥180 | ||||
| 8 | Amandla ombane amileyo (kwioyile ye90℃±2℃) | 1mm | KV/mm | ≥14.2 | ≥14.2 | |
| 2mm | ≥12.4 | ≥12.4 | ||||
| 3mm | ≥11.5 | ≥11.5 | ||||
| 9 | Umbane wokuwohloka okunxuseneyo (imizuzu eyi-1 kwioyile ye-90℃±2℃） | KV | ≥45 | ≥45 | ||
| 10 | I-Dielectric dissiption factor (50Hz) | - | ≤0.04 | ≤0.04 | ||
| 11 | Ukunyangwa kwe-Volumn Insulation | Okuqhelekileyo | Ω | ≥1.0×1012 | ≥1.0×1012 | |
| Emva kokucwina iiyure ezingama-24 | ≥1.0×1010 | ≥1.0×1010 | ||||
| 12 | Ukutsha (UL-94) | Inqanaba | V-1 | V-0 | ||
